캐리어테이프 포밍머신(CARRIER TAPE FORMING MACHINE)

     Model number: SHT-W88PL

SMT용 전자부품 및 반도체용 캐리어 테이프 생산장비로서 88mm, 72mm, 64mm, 56mm를 한 줄 생산 및 12mm, 16mm 3열, 24mm, 32mm, 44mm 2열 생산 가능하며, 시간당 최대 700미터의 캐리어테이프를 제조할 수 있는 장비

Production Speed: 60shots / minute

Width of Tape       : 88mm / maximum

Pocket Depth       : 12mm / maximum

Production row    : Single row , Multi row up to 4 lane

                           12mm×4row       48mm×60shots×60minutes×4lines = 691meters/hour

                           16mm×3row     48mm×60shots×60minutes×4lines = 518meters/hour

                           24mm×2row     48mm×60shots×60minutes×3lines = 345meters/hour

                           32mm×2row     48mm×60shots×60minutes×2lines = 345meters/hour

                           44mm×2row     48mm×60shots×60minutes×2lines = 345meters/hour

                           56mm×1row     48mm×60shots×60minutes×1lines = 172meters/hour

                           64mm×1row     48mm×60shots×60minutes×1lines = 172meters/hour

                           72mm×1row     48mm×60shots×60minutes×1lines = 172meters/hour

                           88mm×1row     48mm×60shots×60minutes×1lines = 172meters/hour

Base Material   :   PS, PVC, A-PET & PC with Conductive & Non-conductive

Control System :   PLC Control (Programmable control) & Touch Panel

Un-winder Section: Geared brake motor 60W, AC 220V, Three phase, 60Hz

                            Inside diameter ¢76mm (3inchbobbin) / Outside diameter ¢560mm

Heating Section    : Two-steps heating

 Pre heating / Forming heating

 Cartridge heater 200W*4ea,AC 220V, Single phase

Forming Section : Air pressure system, Female Type Mould

Piercing Punching Section: Press punching system

CAM Drive Unit     : Feed CAM 48mm (standard) / 40, 32, 28, 56mm (option)

                            Mould CAM / Die CAM

                            Geared motor 0.75kw,inverter control, AC 220V three phase, 60Hz

Cooling System    : Water Circulation, Water Pump Motor 230W, AC 220V

Single phase, 60Hz, Water Tank Sus 15liters

Refrigerator to be integrated inside

Installation Area    :160cm*160*180cm (L*H*W)

Machine Weight 500kg

Air supply 5~7bar

Power supply AC 220V, Three phase, 60Hz

Cutting Unit          : Air Cylinder Cutting

Slitting section    :  Rotary cutter

Winding section :   Inside diameter ¢13 & ¢76mm

                           Outside diameter ¢560mm max gear motor 60W  

Option             :    Piercing punching, Traverse winding machine, Vision system

                                      홈       ㅣ       제품소개    ㅣ        회사소식  ㅣ        회사소개   ㅣ      연 락 처  ㅣ

주 소: 서울 금천구 가산동 60-4 코오롱테크노밸리 108호 (Zip: 153-770)              Tel: 82-2-854-2572                 Fax: 82-2-854-2573

 Email: sht@seonghan.com               sht@seonghan.co.kr                               Website: www.seonghan.com         www.seonghan.co.kr